Product Selection
- View all products
- 1-K epoxy resin adhesives
- 2-K epoxy resin adhesives
- Acrylates
- Anaerobic adhesives
- Anaerobic repair adhesives
- Anaerobic threadlocker
- Ceramic HT adhesives
- Cyanoacrylate adhesives
- Cyanoacrylate adhesives for 3D printing
- Electrically & Thermally Conductive Adhesives
- HT Electrical Coating & Sealant
- HT ceramic metal pastes
- HT electrical coatings and sealants
- HT potting and casting materials
- High-performance epoxy resins
- Potting and casting materials
- Surface activator
- Temporary adhesives
- Thermal conductive adhesive
Hardener Lacquer 2 is the catalyst for acrylic adhesives (MMA) for fast bonding of metals, composites and thermoplastics such as ABS, PVC and acrylic.
Agomet F 300 A and B are reactive adhesives for metal and plastic bonding.plastic bonding.
Agomet F 305 A and B are reactive adhesives for metal and plastic bonding.
Agomet F 330 is suitable for bonding ferrous, non-ferrous and solid metals as well as hard plastics at room temperature.
Araldite 2010-1 is a room temperature fast curing, paste-like, general purpose, two-component adhesive.
Araldite® 2011 is a room temperature curing, high viscosity, general purpose, two component adhesive.
Araldite® 2014-2 is a room temperature curing, two-component paste adhesive.
Araldite 2020 is a room temperature curing, low viscosity, two component adhesive specially designed for bonding glass.
Araldite® 2022-1 is a room temperature curing, two component, metacrylic ester based adhesive for the rapid bonding of a wide variety of substrates including those that are "difficult to bond".
Araldite ® 2047-1 is a cold-curing two-component methacrylic ester-based adhesive for metal and plastic bonding.
Araldite® F 300 has very high curing speeds, which recommends its use wherever, for example in series production, high production numbers require short pot lives.
Araldite® F310 is a room-temperature curing, two-component, methacrylic ester-based adhesive for rapid bonding of metals, composites and thermoplastics such as ABS, PVC and acrylics. The adhesive has a joining time of 10 minutes.
Aremco-Bond 517 - 2-component adhesive with high thermal conductivity
Aremco-Bond 526 - Temperature-resistant organic 2-component adhesive
Aremco-Bond 526-N - Temperature-resistant organic 2-component adhesive
Aremco-Bond 556 - Electrically conductive, silver-filled 2-component adhesive
Aremco-Seal 529 - High temperature resistant 1-component sealant
Ceramabond 503 - High-temperature resistant 1-K ceramic adhesive
Cerama-Dip 538-N - High temperature resistant 1-component coating
Ceramabond 569 - High temperature resistant 1-component adhesive
Ceramabond 571 - Ceramic 2-component adhesive with high thermal expansion
Ceramabond 670 - high temperature resistant 1-component adhesive
Ceramabond 671 - high temperature resistant 1-component adhesive
Ceramabond 835 - High temperature resistant 1-component adhesive
Ceramabond 835-M - High temperature resistant 1-component adhesive
Ceramabond 865 - High temperature resistant 1-component adhesive
Ceramacast 505 - High-temperature resistant 1-K ceramic adhesive
Ceramacast 510 - High-temperature resistant 1-K casting compound
Ceramacast 645 - High temperature resistant 1-component ceramic potting material
Ceramacast 645-N - High temperature resistant 1-component ceramic potting material
Ceramacoat 512 - High-temperature resistant 1-K ceramic coating
Ceramacoat 512-N - 1-component high-temperature resistant ceramic coating compound
Cerama-Dip 538 - high temperature resistant 1-component coating
Graphi-Bond 551-RN - High temperature resistant 1-component graphite adhesive
Loctite Ablestik A 312 E is a one-component, unfilled, solvent-free epoxy potting compound for insulation applications. A 312 E is a fast curing product with excellent chemical, heat and moisture resistance combined with good dielectric properties.
The hardener Loctite Catalyst 15 is intended for use with casting resins and potting compounds.
Loctite Catalyst 23 LV is a room temperature curing epoxy hardener that offers long pot life, low viscosity and excellent thermal shock and impact resistance.
Loctite Catalyst 24 LV is a low viscosity room temperature curing epoxy hardener with excellent thermal cycling and impact resistance.
Loctite Catalyst 27-1 is a two-component, general purpose, electrical insulative potting compound.
The hardener Loctite Catalyst 28 is intended for use with casting resins and potting compounds.
The hardener Loctite Catalyst 9 is intended for use with casting resins and potting compounds.
Henkel Loctite STYCAST 1090 is used for potting and encapsulating electronic components and aerospace applications requiring low weight.
LOCTITE STYCAST 1264 cures with slight elongation and almost without stress.
LOCTITE STYCAST 1265 is an epoxy potting compound with excellent adhesion to a wide variety of substrates.
STYCAST 1266 A/B is a clear, low viscosity, room temperature curable epoxy sealant and sealant. It has good moisture resistance, good electrical properties and good impact resistance.
Permabond 102 - Medium viscosity 1-component cyanoacrylate adhesive
Permabond 105 - low viscosity 1-component cyanoacrylate adhesive
Permabond 2010 - Fast curing 1-component cyanoacrylate adhesive
Permabond 2011 is a cyanoacrylate adhesive suitable for bonding porous surfaces due to its dripping behavior.
Permabond 2050 - Flexible 1-component cyanoacrylate adhesive
Permabond 240 - Slow curing 1-component cyanoacrylate adhesive
Permabond 3D10 is a fast curing, low odor, low bloom 3D printing infiltrant with a glossy finish for solidifying 3D parts.
Permabond 3D30 is an ultra-fast curing, low odor, low bloom 3D printing infiltrant with a high gloss finish for curing 3D printed parts.
Permabond 3D90 is a low odour, non-fogging, non-frosting, matte alkoxyethyl cyanoacrylate.
Permabond 4C10 is a low viscosity, high purity, medical device grade, cyanoacrylate adhesive.
Permabond 4C20 is an intermediate viscosity, medical device grade, cyanoacrylate that is used to bond through intermediate gaps.
Permabond 4C30 is an intermediate viscosity, medical device grade, cyanoacrylate that is used to bond through intermediate gaps.
Permabond 4ES70 is a single-part epoxy adhesive designed for needle bonding.
Permabond 731 - tough elastic 1-component cyanoacrylate adhesive
Permabond 743-HT - Highly flexible 1-component cyanoacrylate adhesive
Permabond 748 - Highly flexible 1-component cyanoacrylate adhesive
Permabond 792 - extremely fast-curing 1-component cyanoacrylate adhesive
Permabond 802 - High temperature resistant 1-component cyanoacrylate adhesive
Permabond 820 - High temperature resistant 1-component cyanoacrylate adhesive
Permabond 910 - Fast-curing 1-component cyanoacrylate adhesive
Permabond 920 - High temperature resistant 1-component cyanoacrylate adhesive
Permabond 940 is a low odour, non-fogging, nonfrosting alkoxyethyl cyanoacrylate.
Permabond A1042 - Vibration resistant anaerobic threadlocker
Permabond A1044 - Chemical-resistant anaerobic thread sealant
Permabond A126 - High strength anaerobic assembly adhesive
Permabond ES550 - High strength 1-part epoxy resin adhesive
Permabond ES558 - High temperature resistant 1-component epoxy resin adhesive
Permabond ES562 - High temperature resistant 1-part epoxy resin adhesive
Permabond ES568 - Vibration-resistant 1-component epoxy resin adhesive
Permabond ES569 - High-strength 1-part epoxy resin adhesive
Permabond ET500 is a 2-component epoxy adhesive that cures quickly and provides hand strength after approximately five minutes.
Permabond ET505 is a room temperature curing structural 2-component epoxy adhesive.
Permabond ET510 is a semi-flexible 2K structural adhesive with high resistance to water, gasoline and oils.
Permabond ET514 is a fast curing, thixotropic 2-component epoxy adhesive with excellent impact and vibration resistance.
Permabond ET5143 is a fast curing, thixotropic 2-component epoxy adhesive with excellent impact strength and vibration resistance.
Permabond ET5147 is a fast curing 2-component epoxy adhesive with excellent environmental resistance.
Permabond ET538 is a room-temperature-curing structural 2-component epoxy adhesive with special adhesive strength.
Permabond ET5390 is a thixotropic 2-component epoxy adhesive with the consistency of a soft paste.
Permabond ET5392 is a 2-component, semi-cured epoxy adhesive well suited for structural applications subject to external influences such as vibration or impact.
Permabond ET5393 is a fully cured 2-component epoxy adhesive with good suitability for structural applications exposed to external influences such as vibration or impact.
Permabond ET540 is a high temperature 2-component epoxy adhesive that cures at room temperature.
Permabond ET5401 is a semi-flexible non-shrinking 2-component epoxy adhesive with good adhesion properties.
Permabond ET5411 is a 2-component epoxy adhesive with exceptionally high chemical resistance after full cure.
Permabond ET5428 is a thixotropic 2-component epoxy adhesive with excellent impact strength and vibration resistance.
Permabond F201 is an anaerobic curing adhesive with high peel and impact strength.
Permabond F202 is an anaerobic curing adhesive with high peel and impact strength.
Permabond HH167 is a high viscosity gap filling silver paste with chemical and high temperature resistance.
Permabond MT382 - Modified 2-component epoxy resin adhesive
Permabond® Polyolefin Primer has been developed for surface treatment of polyolefins, PTFE and silicones prior to bonding with Permabond® Cyanoacrylate adhesives.
Permabond TA437 is a single component structural acrylic adhesive designed primarily forbonding metals, ferrites and ceramics.
Pyro-Duct 597 - Electrically conductive silver-filled 1-component adhesive
Pyro-Duct 598 - Nickel-filled, high-temperature, 1-component adhesive
Pyro-Putty 2400 - High temperature resistant 1-component ceramic / steel filled adhesive
Pyro-Putty 653 - High temperature resistant, filled 1-component ceramic / metal paste
Ultra-Temp 516 - Extremely temperature-resistant 1-component ceramic adhesive
Permabond A118 - High strength anaerobic assembly adhesive